What is The Process of Derma Rolling?
Micro-needling, also often called derma rolling, is a beautifying procedure in which thousands of small needles are interleaved into the surface of the human skin using a Derma Roller. The procedure might look terrifying as the surface of the face is compressed by hundreds of needles (192 to be exact). The procedure is simple and no invasive and the recovery depends on the length of the needles used in the process.
Derma rolling works by generating tiny gashes on the surface of the face which encourage collagen and elastin to be produced by the human body. For the uninformed, collagen is the most plentiful protein found in the human body and is accountable for clasping at the same time all the body’s connective tissues like skin, muscles, tendons, cartilage, and bones. Collagen is responsible for making people look young and beautiful. Although it is believed that the growth of collagen stops reducing by a percent after the age of 25, which results in the process of aging. The next question that comes to one’s mind is what sized machine should one order from the Derma Roller manufacturers.
The size of the machine one is looking to order from the Derma Roller manufacturer in India, is totally dependent on what one wants to achieve with the machine. If one is trying to treat shallow acne scars, then one would need 1.0 mm sized needles, if one was trying to treat deep acne scars then one needs the 1.5 mm sized needles, if one is trying to treat enlarged pored then one needs needles sized between 0.25 – 0.5 mm if one was trying to treat skin staining one would need needles sized 0.2 to 1.0 mm.
Now we will explain the process of how one should use a Derma Roller
The first step every user should take is to sterilize the derma roller by permitting it to immerse in 70% isopropyl alcohol for about five to ten minutes. The machine has to be soaked in the 70% solution because it dissolves more gradually which permits it to come into thorough contact with bacterial life.
The second step the person should take is to clean his face with a pH-balanced cleanser. Also if an individual is looking to use a derma roller that has needles lengthier than 0.5 mm, he must wipe his face with 70% isopropyl alcohol before he/she commences the rolling process. The individual seeking to undergo the process should use a numbing cream if his pain tolerance levels are low.
Before an individual starts using the Derma roller, he should divide his face into sections and avoid using the roller in areas close to the eye. One should use the roller supplied by the Derma Roller suppliers in one direction six to eight times and ensures that he lifts the roller after every pass. If one is treating his forehead, for example, the first six to eight passes should be vertical and then the next six to eight passes should be perpendicular.
Once a person has completed using the Derma roller he should wipe his face with a wet towel and clean the roller with dishwasher soap. Once all this is done the individual should sterilize his Derma roller again by allowing it to soak in 70% isopropyl alcohol for around ten minutes.
One should follow the process with basic skincare routines, and use such products that concentrate on hydrating, curing, and growing collagen creation. One could also use a sheet mask or use face products that contain Vitamin C.